Document navigation

Network Resource

This topic falls into the following parts:

  • L2 network resources
  • L3 network resources
  • L3 network architecture model
  • Dedicated networks
  • Route resources
  • SDN controller
  • Network usage procedure
  • Network protocol

L2 Network Resources

L2 network resources include L2 networks and VXLAN pools.

  • An L2 network corresponds to a layer 2 broadcast domain. This L2 network supports multiple network types, such as L2NoVlanNetwork, L2VlanNetwork, VxlanNetwork, and HardwareVxlanNetwork.
  • L2NoVlanNetwork and L2VlanNetwork is a group that must be identical to the configurations of compute node ports on the switch sides.
  • Both VXLAN Pool and VxlanNetwork with the software SDN type provide the VxlanNetwork configurations. Before you use VxlanNetwork, create a VXLAN pool first. Then, create VxlanNetwork by specifying or randomly choosing VNIs.
  • Both VXLAN Pool and HardwareVxlanNetwork with the hardware SDN type provide the HardwareVxlanNetwork configurations. Before you use HardwareVxlanNetwork, create a VXLAN pool first. Then, create HardwareVxlanNetwork by specifying or randomly choosing VNIs.

L3 Network Resources

An L3 network can serve as a sub-resource of the L2 network. Mainly based on the L2 network, the L3 network provides the network configurations for VM instances, including the IP range, gateway, DNS, and network service.

L3 Network Architecture Model

The Cloud supports two L3 network architecture models: flat network and VPC network.

Dedicated Networks

Dedicated networks include management networks and flow networks. Note that you cannot create VM instances by using dedicated networks.

Route Resources

ZStack Cloud provides network services for VM instances by using custom Linux VM instances to serve as routing devices. Related route resources mainly include VPC vRouters, VPC HA groups, vRouter images, and vRouter offerings.

SDN Controller

By adding SDN controllers, you can take over the SDN networks of hardware switches on the Cloud to lower the network latency and improve the VXLAN network performance.

Network Usage Procedure

You need to first create an L2 network, use the L2 network to create an L3 network, and then use these networks to provide multiple network services.

Network Protocol

ZStack Cloud public network, flat network, and VPC network support two network protocols: IPv4 and IPv6. You can create an IPv4 network, an IPv6 network, or an IPv4+IPv6 network as needed.