Step 2: Deploy the Migration Service

Procedure

1. On the Migration Service page, click Install.
2. In the Deploy Migration Service dialog, configure the following options:

   Option	Description
   Migration Service Version	Displays the version of the service to be installed and deployed.
   Data Center	The migration service is deployed as a data gateway VM. Select a data center.
   Location	Select where the service runs.
   CPU	The default is 8 cores. Set the number of CPU cores.
   Memory	The default is 8 GB. Set the memory size.
   Storage Location	Specify the data storage.
   Storage Pool	When the storage location is distributed storage, specify a storage pool.
   Disk 1	The default is 100 GB. Set the system disk size to at least 100 GB.
   Migration Network	Specify a distributed port group to use as the migration network. Ensure that the selected distributed port group has network connectivity with both the source and target platforms.
   IPv4 Address	Specify an IP address. Note: The IP address allocation method depends on the configuration of the selected migration network: When DHCP is enabled on the migration network, the system automatically assigns an IP address. When DHCP is disabled on the migration network, you need to specify an IP address. When IPAM is enabled on the migration network, manually specified IP address must be within the selected network segment.

3. Review the configuration and click OK.