Modify Distributed Port Group Configuration

Procedure

1. In the navigation pane, choose Inventory > Network Resource.
2. In the resource tree, select the target distributed port group.
3. Modify basic configuration as needed.
   1. Click Actions > Modify Configuration.
   2. In the Modify Configuration dialog, modify the name, description, VLAN ID, MTU, and DHCP service as needed.
   3. Click OK.
4. Add or delete network ranges as needed.

   Click the Network Range tab, and then perform the corresponding operation as needed.

   Note:

   • Deleting a network range detaches the VM NICs that use the network range. Proceed with caution.
   • If the distributed port group already has a DHCP service IP and the DHCP service IP is in the selected network range, deleting all network ranges from the distributed port group releases the DHCP service IP. If only some network ranges are deleted, the DHCP service IP is retained.
5. Modify DNS configuration as needed.
   Click the DNS tab, and then perform the corresponding operation as needed.